1. Home
  2. Product Type
  3. Antennas
  4. Base Station Antennas & Equipment
  5. Base Station Antennas
  6. 3X-V65S-C3-3XR
Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

3X-V65S-C3-3XR

6-port small cell antenna, 6x 1695–2690 MHz, 65° HPBW, 3x RET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Download
Features and Benefits
  • Three DualPol® antennas under one radome
  • Fully integrated flange mounting system for ease of installation
  • Ideal concealment solution for areas with special regulations regarding visual impact
  • 4.3-10 connector significantly improves PIM consistency and smaller footprint on antenna bottom

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Length 596 mm | 23.465 in
Net Weight, without mounting kit 7.4 kg | 16.314 lb
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.3 13.6 13.7 14.3 14.3
Beamwidth, Horizontal, degrees 74 73 72 68 71
Beamwidth, Vertical, degrees 18.7 17.5 16.7 14.6 13.6
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 15 16 16 16 15
Front-to-Back Ratio at 180°, dB 32 31 30 34 36
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 35 35 35 35 35
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 13.0 13.4 13.5 14.1 14.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.3 ±0.5 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 12.9
10 ° | 13.1
20 ° | 13.0		 0 ° | 13.3
10 ° | 13.4
20 ° | 13.3		 0 ° | 13.5
10 ° | 13.6
20 ° | 13.3		 0 ° | 14.1
10 ° | 14.2
20 ° | 13.6		 0 ° | 14.1
10 ° | 14.3
20 ° | 13.2
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±2.6 ±3.1 ±4.7 ±4.1
Beamwidth, Vertical Tolerance, degrees ±1.5 ±0.9 ±1.2 ±1.2 ±1
USLS, beampeak to 20° above beampeak, dB 14 15 15 14 11
Front-to-Back Total Power at 180° ± 30°, dB 24 24 25 26 26
CPR at Boresight, dB 19 22 22 24 18
CPR at Sector, dB 10 10 7 7 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Weight, gross 10.2 kg | 22.487 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Small Cell
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 6
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Input Voltage 10–30 Vdc
Internal RET High band (3)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Length 596 mm | 23.465 in
Net Weight, without mounting kit 7.4 kg | 16.314 lb
Outer Diameter 200 mm | 7.874 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 400 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.3 13.6 13.7 14.3 14.3
Beamwidth, Horizontal, degrees 74 73 72 68 71
Beamwidth, Vertical, degrees 18.7 17.5 16.7 14.6 13.6
Beam Tilt, degrees 0–20 0–20 0–20 0–20 0–20
USLS (First Lobe), dB 15 16 16 16 15
Front-to-Back Ratio at 180°, dB 32 31 30 34 36
Isolation, Cross Polarization, dB 25 25 25 25 25
Isolation, Inter-band, dB 35 35 35 35 35
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 13.0 13.4 13.5 14.1 14.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.3 ±0.5 ±0.6
Gain by Beam Tilt, average, dBi 0 ° | 12.9; 10 ° | 13.1; 20 ° | 13.0 0 ° | 13.3; 10 ° | 13.4; 20 ° | 13.3 0 ° | 13.5; 10 ° | 13.6; 20 ° | 13.3 0 ° | 14.1; 10 ° | 14.2; 20 ° | 13.6 0 ° | 14.1; 10 ° | 14.3; 20 ° | 13.2
Beamwidth, Horizontal Tolerance, degrees ±2.5 ±2.6 ±3.1 ±4.7 ±4.1
Beamwidth, Vertical Tolerance, degrees ±1.5 ±0.9 ±1.2 ±1.2 ±1
USLS, beampeak to 20° above beampeak, dB 14 15 15 14 11
Front-to-Back Total Power at 180° ± 30°, dB 24 24 25 26 26
CPR at Boresight, dB 19 22 22 24 18
CPR at Sector, dB 10 10 7 7 9

Mechanical Specifications

Wind Loading @ Velocity, frontal 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 58.0 N @ 150 km/h (13.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 320 mm | 12.598 in
Depth, packed 300 mm | 11.811 in
Length, packed 850 mm | 33.465 in
Weight, gross 10.2 kg | 22.487 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system